D=Diahragm G=Gauge S=Switch T=Transmitter
*NEMA 4X switch models have a 1/2" NPT conduit port as standard (all other have 1/4" NPT standard).
A DIN 43650A-PG11 with mating connector is optional, rated IP65 & NEMA 4X.
For complete dimensions click on Drawing PDF in table above
Select from each of the applicable categories to construct a model number. Write down model number for future reference. Contact Orange Research or your local Orange Research distributor for additional options and pricing information. Reordering? You must supply the Part Number from your instrument label.
Gauge (w/switch option): 1516DGS - 1A - 2.5B - A 0-15 psid, 2 switch to close at 10 psid ascending
Switch only (no gauge): 1516DS - 1C - A 0-15 psid switch to close at 10 psid ascending
Diaphragm Sensor Differential Pressure Gauges
These diaphragm sensor differential pressure gauges measure the pressure difference between two points. Acting in the place of two pressure gauges, these units allow for one simple reading on an easy-to-read scale. Popular in filtration, flow and level applications, they are a low cost alternative to bourdon tube and bellows designs.
Our 1516 Series models are our most popular diaphragm sensor design. They combine a highly sensitive sensor with high line pressure capabilities.
We offer them with bodies (and wetted parts) of aluminum, stainless steel or brass. A variety of dial sizes are also available, from 2.5 inch to 6 inch, with many porting and mounting configurations. Choose from a wide selection of standard options; enough to satisfy any requirement.
Our 1800 Series models are our most sensitive sensor designs. While being sensitive they also handle high line pressures up to 150 psi!
Note: Select these diaphragm models for air or gas applications or where fluid migration from the high to low pressure ports cannot be tolerated.
Switches, Relays, Transmitters
A variety of reed switches and relays can accompany the gauges or be supplied on their own, without a dial. SPST switches are offered normally open (N.O.) or normally closed (N.C.). SPDT reed switches also are available. DPDT relays are offered for high inductance applications, such as those incorporating motors or solenoids. Transmitters offer a current or a voltage output. More information on switches, relays and transmitters
Orange Research Incorporated • 140 Cascade Boulevard • Milford CT 06460
(203) 877-5657 • FAX: (203) 783-9546 • Toll-Free: 1-800-989-5657