- ORANGE RESEARCH INC.
- 140 Cascade Blvd.
- Milford CT 06460
Made In The U.S.A.
Required fields noted with *
This case is the most popular choice since the
gauge is often supported by the process line. An optional
c-clamp is offered for panel mounting.
This case has holes for panel mounting. Two or three holes are drilled in the flange to accept screws for flush mounting to the panel.
(these materials represent dial case only, not the pressure body):
All of our cases are weather resistant. This feature also facilitates liquid filling, which is an option available on all standard gauges.
Our miniature differential pressure indicators come standard with a weatherproof 1" molded lens. A special 2.5" dial also is available.
A variety of brackets are available for mounting differential pressure gauges on walls, panels and pipes. Surface plates flush mount instruments without external switches. Some have extended angle brackets to hold models with Nema 4X switch or relay enclosures. Pipe clamps mount units to various size rods or pipes. Flanged dial cases and c-clamps (above) offer panel mounting options.
|Description||Suitable for Model Number|
|Flush/surface mounting brackets|
|Type A||1201, 1502, 1516|
|Type B||1203, 1533, 1800 series|
|Pipe mounting brackets (specify pipe size)|
|Type C||1201, 1502, 1516|
|Type D||1203, 1533, 1800 series|
|Type E||For hazardous location models 1204, 1504, 1514, 1804|
Gauge and Lens Options
Special Dial Options
*Need Pantone reference and sample or file
Alternate Port Sizes*
*Many types avail., contact factory
*Magnet is always Teflon coated on flow meters